Every Dimide clamp will be tested to 120% of its rated load to ensure clamp performance is met.
Dimide clamps are 100% manufactured and assembled in the United States using only the finest materials and processes.
The Dimide Clamp's screw runs in reverse in order to accommodate the torque of air impact wrenches which are designed to favor the reverse direction. This allows delivering the highest clamp load when air pressure is not optimal.
Yes, the grips are all metal.
The 5-inch clamp weighs approximately 7 pounds with the handle.
The 8-inch clamp weighs approximately 11 pounds with the handle.
The Dimide clamp use a 1/2-inch bit size.
Yes, the handle attaches into the screw stop and not the hex head so you never have to remove the handle to use the hex.
Yes, every clamp is sold with the handle included.
The handle's diameter is 2-inches.
These holes are designed for use with a reaction bar to deliver higher torque loads. You can also use this holes to store the clamp.
Each of our clamps are rated for maximum torque instead of nut busting torque.
We suggest using a moly extreme pressure grease applied as needed.
At Dimide we are always looking to innovate! We plan on offering more sizes and variations of our current clamp, in addition to other designs. Join our email list to stay up to date on our development.
Interested in stocking the Dimide Clamp in your store? Please email us at email@example.com or call us at (203) 745-6496 and we will work together to come to the best solution.