DIMIDE 1/4 SERIES CLAMP DIMIDE 1/4 SERIES CLAMP | COMING SOON TO KICKSTARTER

Dimide 1/4 Series Clamp | Tighten How You Want

Finally, you will no longer limited by only using the little t-handles of other clamps. With the Dimide 1/4 Series Clamp, there are five ways to tighten the clamp so that you can use whichever method makes the most sense for a given situation.

Impact Driver Compatible

Impact Rated Hex

The Dimide 1/4 Series Clamp is impact driver rated and includes a hardened 1/4" hex. Specially designed to be used with common 1/4" impact drivers you will no longer have to struggle to get the clamp force you want again. The 1/4" hex includes grooves for securing the clamp to an impact driver to allow for single-handed use.

Dimide 1/4 Series Clamp Impact Rated

When tightening with an impact driver, use the included detent t-handle as a torque reaction bar.

Single-Handed Impact Tighening

locking onto the clamp's impact hex with an impact driver allows for single-handed use. To make single-handed use even easier, use a bungee cord or other device to effortlessly deliver 2,000 lbs of clamping force single-handedly!

Dimide 1/4 Series Clamp Single Handed

Learn more about single-handed use

Hand Tool Tightening

The 1/4" hex also opens up the clamp to being tightened by an abundance of other hand tools including ratchets and wrenches. Combining a ratchet with the torque reaction handle (detent t-handle) makes tightening the clamp manually a breeze.

Multi-Use T-Handle

 Dimide 1/4 Series Clamp T-handle

The Dimide 1/4 Series Clamp includes a high-strength T-handle. Using a ball detent, the T-handle is retained when you want it to be, but may also be easily removed while tightening the clamp with an impact driver.

 Dimide 1/4 Series Clamp Removed T-handle

The t-handle doubles as a torque reaction bar when the clamp is being tightened with an impact driver or other hand tool.

 Finger Tightening Knurls

Dimide 1/4 Series Clamp Knurls

When you're in a tight area where even a small t-handle can't fully rotate without annoyingly hitting a part you can use the knurls to finger tighten the clamp down and then finish tightening it with the t-handle or other tool.

How To Get A Dimide 1/4 Series Clamp

The Dimide 1/4 Series Clamp will first launch on Kickstarter. To stay informed about pricing, when it will launch and more information subscribe to our email list.

Let Us Know Your Opinion

Comment below or email us at sales@dimide.com and let us know how tightening the Dimide 1/4 Series Clamp anyway you want will change the way you work. 

0 comments

Leave a comment